城市轨道交通钢轨电位和新型回流装置研究

以成都地铁为例,基于钢轨绝缘节的老化和单向导通装置频繁导通问题,将车辆段及停车场等效为小电阻接地支路进行仿真。仿真结果表明,小电阻接地支路可使正线钢轨电位最大提升27.2 V,威胁了正线的安全运营。据此提出一种应用于车辆段与停车场的新型钢轨回流装置,并介绍其控制方法。该新型钢轨回流装置具有辅助列车安全通过绝缘节遏制车辆段与停车场内杂散电流、评估钢轨绝缘节绝缘性能和测量出入段线钢轨过渡电阻的功能。     

城市轨道交通全自动运行线路在无人值守模式下的应急处置

基于不同的场景,详细阐述了无人值守模式下全自动运行线路的应急处置方法、区间疏散方式及救援方式。结合专门的自动应急或远程应急功能,使无人值守全自动运行线路应急处置能兼顾运营效率和安全,避免列车迫停区间。建议做好多职能队员的相关培训工作,并合理选择列车自动运行控制系统的应急功能。     

全自动运行线路车载无线通信设备的唤醒自检项方案

车载无线通信设备为地铁全自动运行提供了车地无线通话功能、乘客紧急对讲功能及控制中心对列车的广播功能,是列车安全运行的关键设备。介绍了无线车载台的设备结构及功能,根据全自动运行特点描述了无线车载台自检过程。结合全自动运行线路实际场景分析,总结得出列车唤醒车载无线设备的自检项。     

新冠肺炎疫情对民航的影响分析与政策建议

为给政府制定应对策略提供决策支持，基于航班运行数据分析了新型冠状病毒肺炎疫情对民航造成的影响。通过分析2003年“非典”和新型冠状病毒肺炎疫情对民航影响的差异，基于情景假设对2020年民航运输发展形势进行了预测分析，并提出有关政策建议。研究结果表明：新型冠状病毒肺炎疫情对民航市场需求造成了严重的冲击，2020年民航运输形势不容乐观，预计年旅客运输量同比基本持平或下降10.9%。政府部门需在做好疫情防控期间运输保障工作的同时，加快出台积极的产业政策以支撑民航发展。     

哈牡线季节性冻土接触网基础处理措施探讨

针对哈尔滨至牡丹江电气化改造工程季节性冻土分布的实际工程特点,结合季节性冻土条件下接触网基础的设计理念,对本项目选用的扩大型钢柱基础和不带扩底的拉线基础进行切向冻胀应力计算分析,并考虑影响切向冻胀力的水分、土质、负温以及基础侧表面的粗糙度等主要因素,提出了对钢柱基础采用换填加扩大型基础的处理措施,对接触网的下锚拉线基础提出了换填及加大埋深等防冻胀处理措施以抵抗季节性冻土的上拔力。     

Investigation of tailpipe and evaporative emissions from China IV and Tier 2 passenger vehicles with different gasolines

The limited understanding of vehicular emissions in China, especially evaporative emissions, is one obstacle to establishing tighter standards. To evaluate tailpipe and evaporative emissions, two typical China IV vehicles and one Tier 2 vehicle with an onboard refuelling vapour recovery (ORVR) system were selected and tested. One of the China IV vehicles was fuelled with gasoline, E10 and M15, respectively, to investigate the effect of fuel properties on vehicular emissions. For each vehicle, cold-start tailpipe emission tests were conducted first, followed by an evaporation test. Based on the emission factors and real-world vehicle activity data, the annual tailpipe and evaporative hydrocarbon (HC) emissions of each vehicle were calculated and compared. The results show that E10 and M15 significantly reduced the tailpipe CO and particle number (PN) emissions but seriously aggravated the NOx emissions, especially for M15. The hot soak losses (HSLs) and diurnal breathing losses (DBLs) were slightly impacted by the fuel properties. The annual evaporative emissions with E10 and M15 were higher than that with gasoline. The ORVR system effectively controlled the evaporative emissions, especially for DBLs. Evaporative emissions from the China IV vehicles were 1.1–1.4 times the tailpipe HC emissions. Additionally, the evaporative emission factors of the China IV vehicles were almost 50% lower than the standard (2.0 g/test), whereas their annual evaporative emissions were almost 1.8–2.8 times higher than those from the Tier 2 vehicle. Therefore, controlling evaporative emissions currently remains a great need in China, and the ORVR might be a recommended evaporative control technology.     

An improved cellular automaton with axis information for microscopic traffic simulation

Cellular Automaton (CA), an efficient dynamic modeling method that is widely used in traffic engineering, is newly introduced for traffic load modeling. This modeling method significantly addresses the modest traffic loads for long-span bridges. It does, however, require improvement to calculate precise load effects. This paper proposed an improved cellular automaton with axis information, defined as the Multi-axle Single-cell Cellular Automaton (MSCA), for the precise micro-simulation of random traffic loads on bridges. Four main ingredients of lattice, cells’ states, neighborhoods and transition rules are redefined in MSCA to generate microscopic vehicle sequences with detailed vehicle axle positions, user-defined cell sizes and time steps. The simulation methodology of MSCA is then proposed. Finally, MSCA is carefully calibrated and validated using site-specific WIM data. The results indicate: (1) the relative errors (REs) for the traffic parameters, such as volumes, speeds, weights, and headways, from MSCA are basically no more than ±10% of those of WIM data; (2) the load effects of three typical influence lines (ILs) with varied lengths of 50, 200 and 1000 m are also confidently comparable, both of which validate the rationality and precision of MSCA. Furthermore, the accurate vehicle parameters and gaps generated from MSCA can be applied not only for precise traffic loading on infrastructures but also for the accurate estimation of vehicle dynamics and safety. Hence, wide application of MSCA can potentially be expected.     

舱口盖强度计算方法

在某集装箱舱口盖结构强度的有限元计算中，对舱口盖周围水平限位器和支撑块处的约束以及顶部压紧器处的关联程度进行了模拟，分别讨论了在垂向设计载荷的情况下，水平限位器、支撑块处的不同约束以及顶部压紧器的不同关联程度对舱口盖应力分布的影响，得出更符合实际情况的舱口盖结构强度计算方法。     

CFRP加固损伤钢板的拉伸及疲劳性能研究

文章基于Dugdale模型理论提出CFRP加固含裂纹钢板加固量的计算方法。通过虚拟裂纹闭合法建立模型来模拟塑性钢板的破坏过程,并完成相关试验,验证了CFRP加固含裂纹钢板有效粘贴长度、有效粘贴宽度取值的有效性。同时利用Paris公式预估疲劳寿命,并结合相关试验数据,探究了CFRP加固对含裂纹钢板疲劳寿命的提高作用。研究表明,有效粘贴长度、有效粘贴宽度的理论取值有效;通过CFRP双侧加固竖裂纹、斜裂纹钢板构件可分别使其疲劳寿命得到显著提高。     

基于改进移动最小二乘法的结构可靠性分析

基于改进移动最小二乘法对结构可靠性问题进行分析,数值模拟结果表明,改进方法可有效提高计算精度.具体方法是使用椭圆范数代替二范数来度量样本点到中心点的距离,并根据上次迭代所得到的响应面在中心点处的法向量与坐标轴所成角度,对影响域进行旋转变换;从而将样本点的权重大小由样本点与中心点、响应面的距离共同决定,并将每次迭代得到的响应面函数在中心点处的法向信息包含在内.